Drain Lining

drain lining


Pipework Relining

Relining of the defective pipework is the most cost effective, least disruptive and fastest method to repair pipework.

Full length, part length and localised patch repairs can be installed to repair/replace defective pipework. Lengths and type of liner necessary can be specified after inspection of the subject pipework.

Full Length Liner:

This method will install a new cured in place pipe within the entire length of the original existing host pipe completely replacing it.

Part Length Liner:

This method will install a part length cured in place pipe to only a section of the original existing host pipe replacing only the defective section/s.

Localised Patch Repair:

This method is typically used to repair only a small section or sections of defective original existing pipework.

Liner Specification

The liner is manufactured from a dense impermeable felt and is designed and tailored to fit exactly the internal dimension of the pipe to be refurbished. The thickness of the liner material can be varied according to design specifications required. A  resin containing an activating catalyst is impregnated into the pipe liner prior to installation.

Lining Suitability

Lining is suitable for sewers, culverts, vertical downpipes etc. It can also be used to seal tanks, chambers and manholes etc. Lining is resistant to most aggressive chemicals and can withstand extremely high temperatures. The customer will benefit from the drain lining repair process in many ways. For more details on drain lining Contact Us now.

Drain Lining

To Contact Drainline about Drain Lining Please call us on Tel: 01403 261549 

Email: [email protected]